Temecula Auto Repair

Stop! It's one of those things your vehicle has to do consistently and reliably.  That's why brake maintenance is vitally important, worthwhile for you to make sure stays up to date. A brake system has many components. If your vehicle has disc brakes, they have pads that make contact with the rotors (the metal discs).  Those pads usually have a metal back, and the part that presses against the discs is made of a material which provides friction to stop the vehicle. Because of that friction, the pads are expected to wear down and eventually the rotors will, too.  But the pads usually are the part that will need to be replaced more often. But how do you know when it's time? There are several signs, one of which is when your brakes squeak or make a high-pitched sound when you step on the brake pedal.  Many newer vehicles also have sensors on the brake pads.  When the pads get worn down to a certain point, the sensor will tell the vehicle's computer to turn on a li ... read more

Whether or not your exterior light bulbs are all working probably is not at the top of your list when you think about your vehicle.  But those exterior lights are more important than you think, and they're vital to your safety and that of other drivers near you. Headlights are important.  Not only do they help you see safely down the road at night, they also help oncoming drivers know that the vehicle they're approaching is not a motorcycle.  Both headlights should be working properly and aimed so that they don't blind other drivers. Taillights are also important for a few reasons.  They tell drivers what your intentions are (changing lanes, turning, stopping).  So, the bulbs back there must be all in working order for maximum safety. Ditto for the front turn signal lights.  They alert oncoming drivers to your lane changes or turns (if you use your turn signals!).  Some side mirrors also have turn signal bulbs in them. There are a few other important ... read more

Winter is one of the hardest times to keep your vehicle clean. But did you know neglecting to wash your vehicle in winter could cost you a significant amount of money in the long run? Here's why. Many areas deal with snow and ice in the winter, and the salt and sand that are used to keep the road surfaces from being slick are also super corrosive to a vehicle's metal body and undercarriage.  That includes all the parts underneath that can be splashed with brine, saltwater and other road debris.  Winter is also tough on vehicles where there isn’t snow, sometimes from ocean salt or winter's extra humidity and rain.  If you have any breaks in your vehicle's paint, whether it be from a little fender bender or a stone chip, that corrosive winter moisture can get through those cracks and start eating away at the metal underneath.  If you can, you should get any dents or damage fixed as soon as possible so your vehicle has a protective layer of paint between road che ... read more

Today's vehicles have some pretty amazing technology in them, including a computerized braking system we all pretty much take for granted these days.  Antilock brake systems (ABS) have been around for years but they help drivers stop in much shorter distances reliably than ever before.  When you see your ABS warning light come on, it's important to find out what's causing the problem. It's a safety issue. Often the problem when the ABS light comes on is a faulty wheel speed sensor.  (In some cases the traction control light will also come on, perhaps because of a non-working wheel speed sensor.) Your vehicle uses the speed sensors to measure the rotational speed at each wheel. That sensor sends the speed data to a computer that can then adjust braking power and prevent your wheels from locking up.  If any of the wheel speed sensors isn't working right, the ABS warning light will go on and the vehicle's computer will turn off the antilock brake system.  You'll s ... read more

It's one of those things that can happen on a multi-day road adventure or a quick trip to the grocery store.  You hit a pothole, go too fast over a speed bump, nail a curb.  When it happens, you think, "I wonder if that was hard enough to do any damage?"  But things seem ok and you continue on your way.  Keep in mind that any blow to your vehicle's suspension can throw it out of alignment.  It can be a hard knock from the road or from another vehicle, such as being involved in a minor accident.  When your suspension is out of alignment, it means that the wheels aren't all pointing where they should.  And after a while, it can make your tires wear unevenly and cause problems with steering and handling. Let's go back to that pothole or curb you hit hard.  Even though you think there was no damage done, if you wait until you see tire wear, you may need to replace all four tires, not an inexpensive proposition. That's why it's a good idea to make sur ... read more

Cold weather can present some real challenges when it comes to your vehicle's windshield.  Think of it.  Your windshield is your window to the world when you're driving, and clear visibility is extraordinarily important for safe travels. So here are 3 tips to ensure that your windshield can do its job during the cold weather. Don't ever pour hot water on a frozen windshield.  Let's say you head outside and see your vehicle covered with ice. You think, hey, maybe I can heat up a pot of water on the stove and melt that off fast.  Don't do it!  You run the risk of shattering the glass the second that hot water hits the frigid glass.  Ditto for using a propane torch.  Glass does not do well with sudden temperature changes.  Instead, turn on your engine and start the defroster, which heats the windshield up gradually.  Use a plastic scraper designed for windshields (don't EVER use metal to scrape) and be patient.  Don't hammer on the ice to ... read more

Let's say you live in a cold climate where the snowy, icy weather challenges you to clear the salt and debris tossed up on your windshield.  You push your windshield washer switch expecting a good stream of fluid so the blades can wipe the glass clean. Yet nothing comes out.  Nada, zip.  What's going on? You know you filled up the windshield washer reservoir within the last week or so.  Well, there could be a few things causing your windshield washing system to fail.  One culprit? The hoses that are supposed to carry that fluid from the washer pump to the spray nozzles may be frozen, or maybe they're cracked and leaking. It could be the nozzles themselves are stopped up, either iced up or jammed full of debris.  Your windshield wiper/washer switch could be worn out or the electrical system may not be conducting power to the washer pump.  It's important that this system work properly, especially on days when the sun may be in front of you and your wind ... read more

In a year marked by unusually heavy flooding in North America, drivers are very aware of the possibility they may find themselves driving where water has come over the road.  It can be a daunting and frightening situation.  Flooding waters can move quickly and unpredictably, so you have to keep your wits about you when you encounter that situation. Here a sample of one vehicle manufacturer's guidelines on what to do.  First, the vehicle is designed to go through some water, but you must be careful.  Never attempt to drive through water deeper than the bottom of your tires. You can get out of your vehicle to check the depth of the water, but you can never be sure that you aren't going to drive into a spot where the road has washed away.  You can't see below the surface of the water, and suddenly you could find yourself in a place where the road drops off unexpectedly.  In swift moving storm runoff, your vehicle could literally be floating away with the curr ... read more

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is.  But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode. Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufactu ... read more

It's chilly outside. You flip on that switch that looks like a picture of a seat with little heat waves rising from it.  You expect soon you'll feel that warmth but… wait! It's not getting warmer.  Oh no, what's wrong with my seat heater? There could be lots of reasons it's not working, and it could be as simple as a fuse or as major as the heating element itself.  But it's something to leave to a pro to diagnose and repair. Let's say it turns out to be a blown fuse.  Simply replacing the fuse may not fix it because there was a reason the fuse blew in the first place.  It's possible the on-off switch has worn out or corroded.  Perhaps the wiring connection isn't completing the circuit (could be corroded or full of dirt) or the voltage reaching the heating element isn't correct.  There's a little sensor that keeps track of the seat heater's temperature called the thermistor.  When the seat is hot enough, it will stop the juice from heating ... read more